Man VS Woman

읭

women: 총
men: M40A3
밀덕:Development of the M40A3 began in 1996 and concluded in 2001, when it was placed into service during Operation Enduring Freedom. It served in Operation Iraqi Freedom other subsequent conflicts. Though its designation would remain M40A3 until 2009, its exact configuration varied with time. Listed here is a description of the components used in the M40A3.

Action: The M40 has always been based on the Remington 700 Short Action with .308 bolt face, and this is no different in the M40A3. These actions are tuned by Marine armorers; the trigger guard assembly is manufactured by the DD Ross Company, though several M40A3s use Badger Ordnance trigger guards. In 2007, the Marine Corps began replacing the DD Ross trigger guard assemblies with the M5 detachable magazine trigger guard manufactured by Badger Ordnance.

Barrel: The barrel is a Schneider 610; 24-inch, 6-groove, 1:12" match-grade heavy barrel.
Stock: All service M40A3s are based upon the A4 Tactical Riflestock, a benchrest-style fiberglass riflestock made by McMillan Fiberglass Stocks and cast molded in an OD Green color. The action is glass bedded into the stock with aluminum pillars, while the barrel is allowed to "float" (it is attached only to the action), ensuring it is stress free during operation. The stock has adjustable length-of-pull (through a buttstock spacer system) and a Marine manufactured adjustable saddle-type cheekpiece. The stock also has six mount flush cups, two on each side front and back and one each on the front and rear underside. One bipod stud is located on the underside of the forearm.
Sling: The Model 1907 sling that has been historically used on M40A3s has been replaced with the Quick Cuff Model Two sling manufactured by Tactical Intervention Specialists.


Snipers utilize a M40A5 with tripod and suppressor while training at the Mountain Warfare Training CenterBipod: The M40A3s use a 6–9" Harris notched swivel type bipod with a KMW podlock. The QD bipod attaching screw is replaced with a screw made by Jon Tank of Tanks Rifle Shop.

Dayscope: The Scout Sniper Day Scope, a modified Schmidt & Bender 3–12× 50 Police Marksman II LP rifle scope with illuminated reticle, has replaced the Unertl MST-100 10× fixed day scope, previously used on both the M40A1 and M40A3. This dayscope is mounted with Badger Ordnance USMC M40A3 34mm scope rings, which use a standard ring in the rear and a wider MAX-50 ring in front. The standard front ring cap is replaced with a SPA-Defense B634 34mm Male Dovetail, as a mounting platform for the Simrad KN200 Night Vision Weapon Sight. The scope and rings are mounted on a DD Ross 30 minute-of-angle lugged Picatinny rail.

이건 반박을할수없다.. 다똑같아

외국자료네요 재밌게 잘 봤심다

women: 총
men: M40A3
밀덕:Development of the M40A3 began in 1996 and concluded in 2001, when it was placed into service during Operation Enduring Freedom. It served in Operation Iraqi Freedom other subsequent conflicts. Though its designation would remain M40A3 until 2009, its exact configuration varied with time. Listed here is a description of the components used in the M40A3.

Action: The M40 has always been based on the Remington 700 Short Action with .308 bolt face, and this is no different in the M40A3. These actions are tuned by Marine armorers; the trigger guard assembly is manufactured by the DD Ross Company, though several M40A3s use Badger Ordnance trigger guards. In 2007, the Marine Corps began replacing the DD Ross trigger guard assemblies with the M5 detachable magazine trigger guard manufactured by Badger Ordnance.

Barrel: The barrel is a Schneider 610; 24-inch, 6-groove, 1:12" match-grade heavy barrel.
Stock: All service M40A3s are based upon the A4 Tactical Riflestock, a benchrest-style fiberglass riflestock made by McMillan Fiberglass Stocks and cast molded in an OD Green color. The action is glass bedded into the stock with aluminum pillars, while the barrel is allowed to "float" (it is attached only to the action), ensuring it is stress free during operation. The stock has adjustable length-of-pull (through a buttstock spacer system) and a Marine manufactured adjustable saddle-type cheekpiece. The stock also has six mount flush cups, two on each side front and back and one each on the front and rear underside. One bipod stud is located on the underside of the forearm.
Sling: The Model 1907 sling that has been historically used on M40A3s has been replaced with the Quick Cuff Model Two sling manufactured by Tactical Intervention Specialists.


Snipers utilize a M40A5 with tripod and suppressor while training at the Mountain Warfare Training CenterBipod: The M40A3s use a 6–9" Harris notched swivel type bipod with a KMW podlock. The QD bipod attaching screw is replaced with a screw made by Jon Tank of Tanks Rifle Shop.

Dayscope: The Scout Sniper Day Scope, a modified Schmidt & Bender 3–12× 50 Police Marksman II LP rifle scope with illuminated reticle, has replaced the Unertl MST-100 10× fixed day scope, previously used on both the M40A1 and M40A3. This dayscope is mounted with Badger Ordnance USMC M40A3 34mm scope rings, which use a standard ring in the rear and a wider MAX-50 ring in front. The standard front ring cap is replaced with a SPA-Defense B634 34mm Male Dovetail, as a mounting platform for the Simrad KN200 Night Vision Weapon Sight. The scope and rings are mounted on a DD Ross 30 minute-of-angle lugged Picatinny rail.

[영타 → 한타 자동 변환]

ㄴ 만약 이것을 한글로 해석했다면 베위댓인데

ㄷㄷ해

누가 저걸보고 포르쉐 911이라고 하냐 ㅡ.ㅡ

포르쉐 911이 언제 저딴 모양이됬지-_-

베글 뜬금없이 웃기네 ㅋㅋㅋㅋㅋㅋㅋ